Mesh belt on mesh belt sintering furnace

Number of views: second
Back to list

This kind of furnace has been widely used in the sintering industry of Hefei, which is of great significance to the personnel. Therefore, it is necessary to understand the relevant knowledge. The following from the mesh belt sintering furnace on the mesh belt to describe, share information.

The mesh belt sintering furnace is mainly used for sintering copper based, iron-based powder metallurgy products, composite materials, bimetallic materials and reduction of metal powder. The mesh belt sintering furnace is a kind of continuous working furnace, which is also controlled by temperature control instrument. It's just that his temperature will be fixed in several sections, and the product will be pushed in slowly through the mesh belt. After different temperature stages, the product will burn out.

The mesh belt sintering furnace is mainly composed of feeding section, heating section, slow cooling section, water cooling section, discharging section, mesh belt, mesh belt driving device, protective atmosphere device and electric control device. The lining adopts super energy-saving structure: the insulation layer on the furnace cover adopts the whole fiber needled blanket module, which is anchored on the steel plate of the furnace cover with a special method (commonly known as suspended ceiling structure). This structure has many advantages, such as good heat insulation effect, low energy storage, small heat loss, good thermal shock, convenient maintenance and so on. The service life of furnace lining is greatly improved. The power loss of empty furnace, temperature rise of furnace wall and uniformity of furnace temperature are better than relevant standards. The instrument can carry out function selection, configuration and parameter setting, and display the set value and actual value in digital mode. It is not the traditional electrical on-off type in control, but continuously and automatically adjusts the heating power according to the temperature control requirements. It has high precision for high power temperature control, no noise and no interference to internal power grid.

The knowledge about the mesh belt of the mesh belt sintering furnace is described as follows:

Mesh belt specification of mesh belt sintering furnace

1. Belt width: 150 ~ 5500mm

2. Mesh belt speed: 0.15 ~ 0.50m/min

3. Service temperature: - 40 ℃ ~ 1050 ℃

4. Edge form: bending, upsetting, welding, etc.

Performance characteristics of mesh belt in mesh belt sintering furnace

1. It has good corrosion resistance, wear resistance and high temperature resistance.

2. Under negative temperature and high temperature, it has satisfactory cold shrinkage resistance, oxidation resistance and fracture resistance.

3. It has the advantages of reasonable design, compact structure, many specifications, convenient installation and reliable operation.

Form of belt conveyor in belt sintering furnace

There are mesh, herringbone (including herringbone rib, integral flanging mesh belt), chain, baffle, flat metal mesh belt, spiral mesh belt, crawler mesh belt, etc.

From the use and structure of the mesh belt sintering furnace to the specifications and performance characteristics of the mesh belt on the sintering furnace, all aspects are described. I don't know how much you have gained. If you need to know more, please contact us!